Made for the Triumph Thruxton 400

Indicator Adapter for Triumph Thruxton 400

Engineered around the Triumph Thruxton 400's indicator mount, this adapter lets you fit any aftermarket indicator on your Thruxton 400 with a simple bolt-on — no rewiring.

Order Now — ₹249
Pair of 2 · Black
Ships across India
  • Bolt-on, no cutting
  • No wiring changes
  • Fits any indicator
  • 5-minute install
Indicator adapter for the Triumph Thruxton 400
₹499 ₹249 Save ₹250 / SET
The problem we solved

The only adapter built for the 400 series

Triumph's custom indicator shape means nothing else fits — until now. One small part. A whole lot of options.

Exact factory fit

Modeled to Triumph's mount geometry. Zero gap, zero wobble, no shims, no zip ties.

Save 70% vs OEM

OEM indicators run ₹3,000+ and crack on the first tip-over. Run cheap, swap easy.

Fast Shipping

Delivery across India in just 3–5 days.

Triumph Scrambler 400X indicator adapter, black, pair of 2
Indicator adapter for Triumph 400 series, isometric product render
Indicator adapter bolted onto Triumph 400 rear bracket, close-up
The Adapter — V1

Engineered down to the micron.

ASA body, matte black. Each adapter is pressure-tested and threaded to accept standard indicator stems — the universal aftermarket size.

Material
ASA
Finish
Black
Thread
Universal Size
Weight
6gm / pair
Pack
2 pieces
Compatibility
Triumph 400 series (all)
₹249
₹499Save ₹250
Add to Garage →

₹499 ₹249 per pair. Save ₹250

5-minute install

From box to bike. No mechanic needed.

Read the full 7-step installation guide →
01

Unscrew & remove

Loosen the M10 nut, pull the stock indicator clean off.

02

Unplug stock

Disconnect the OEM indicator connector placed inside the slot. Safely remove the harness and keep it for later use.

03

Mount any indicator

Fit your aftermarket indicator to the adaptor. The MotoNyx harness plugs into the rear only. For the front, reuse the old indicator connector — the supplied wire length is sufficient.

04

Bolt-on adapter

Thread the MotoNyx adapter into the factory mount. Done.

One adapter. Whole 400 lineup.

Fits every Triumph 400.

Engineered around Triumph's shared 400-series indicator mount — so the same adapter drops onto every variant in the range.

What riders are saying.

Happy customers
650+
Triumph 400 models
6
Typical installation
5-10 mins
Close-up of the adapter fitted on a Triumph 400 rear indicator mount
Fitted · Speed 400
"Fit my LED indicators perfectly. Saved 2k easily."
Aakash R. · Speed 400
"Quality is solid. Fitting looks OEM-level."
Vikram S. · Scrambler 400 X
"Installed in just 10mins, really a pocketfriendly solution. Highly recommended"
Rohan K. · Speed 400

FAQ

Will it really fit my Triumph 400?+

Yes — designed specifically for the Speed 400 and Scrambler 400 X factory indicator mount.

What indicators can I use with it?+

Any aftermarket indicator with the standard thread. That's 99% of the market.

Is wiring affected?+

The adapter is purely mechanical. MotoNyx offers separate Front Only and Rear Only plug-and-play harnesses. Choose the matching harness for the indicator position; their connectors are different.

My harness is not working. What should I do?+

First, make sure the polarity is reversed. Connect the red wire of the harness to the black wire of the indicator, and the black wire of the harness to the red wire of the indicator. If that doesn't work, switch the polarity and connect red to red and black to black.

Will it void my warranty?+

The adapter is a bolt-on mechanical part. With the matching MotoNyx Front Only or Rear Only harness, the connector is plug and play. Keep the motorcycle's original wiring loom intact and check warranty terms with your dealer.

Shipping & returns?+

Delivery pan-India, charged at checkout based on your pincode.

The indicator nut is too big to fit. What should I do?+

If the supplied indicator nut is too big to fit properly, you can use a smaller M10 nut instead. We recommend using a hex nut or flange nut with an outer diameter of approximately 1.8 cm (18 mm) or less to ensure proper fitting. Please check the available clearance before installation and ensure the nut is securely tightened.

The indicator’s threaded stem is too long and doesn’t fit properly. What should I do?+

If the threaded stem is too long and prevents proper fitting, you may need to carefully shorten it by cutting the excess threaded portion. The final threaded stem length should be approximately 1.6 cm (16 mm) for proper fitting. We recommend getting this done by a local mechanic to ensure a clean cut and proper installation. Please ensure sufficient thread remains for secure fastening.

Stop paying ₹1,000
for a ₹500 indicator slot.

One small upgrade. Years of cheap, swap-friendly indicator choices.

Order the Adapter — ₹249

Secure Razorpay checkout · Dispatched within 24 hours