Designed for the Triumph Scrambler 400 XC's factory mount, this bolt-on adapter accepts any standard aftermarket indicator so you can personalise your Scrambler 400 XC in minutes.

Triumph's custom indicator shape means nothing else fits — until now. One small part. A whole lot of options.
Modeled to Triumph's mount geometry. Zero gap, zero wobble, no shims, no zip ties.
OEM indicators run ₹3,000+ and crack on the first tip-over. Run cheap, swap easy.
Delivery across India in just 3–5 days.



ASA body, matte black. Each adapter is pressure-tested and threaded to accept standard indicator stems — the universal aftermarket size.
₹499 ₹249 per pair. Save ₹250
Loosen the M10 nut, pull the stock indicator clean off.
Disconnect the OEM indicator connector placed inside the slot. Safely remove the harness and keep it for later use.
Fit your aftermarket indicator to the adaptor. The MotoNyx harness plugs into the rear only. For the front, reuse the old indicator connector — the supplied wire length is sufficient.
Thread the MotoNyx adapter into the factory mount. Done.
Engineered around Triumph's shared 400-series indicator mount — so the same adapter drops onto every variant in the range.

"Fit my LED indicators perfectly. Saved 2k easily."
"Quality is solid. Fitting looks OEM-level."
"Installed in just 10mins, really a pocketfriendly solution. Highly recommended"
Yes — designed specifically for the Speed 400 and Scrambler 400 X factory indicator mount.
Any aftermarket indicator with the standard thread. That's 99% of the market.
The adapter is purely mechanical. MotoNyx offers separate Front Only and Rear Only plug-and-play harnesses. Choose the matching harness for the indicator position; their connectors are different.
First, make sure the polarity is reversed. Connect the red wire of the harness to the black wire of the indicator, and the black wire of the harness to the red wire of the indicator. If that doesn't work, switch the polarity and connect red to red and black to black.
The adapter is a bolt-on mechanical part. With the matching MotoNyx Front Only or Rear Only harness, the connector is plug and play. Keep the motorcycle's original wiring loom intact and check warranty terms with your dealer.
Delivery pan-India, charged at checkout based on your pincode.
If the supplied indicator nut is too big to fit properly, you can use a smaller M10 nut instead. We recommend using a hex nut or flange nut with an outer diameter of approximately 1.8 cm (18 mm) or less to ensure proper fitting. Please check the available clearance before installation and ensure the nut is securely tightened.
If the threaded stem is too long and prevents proper fitting, you may need to carefully shorten it by cutting the excess threaded portion. The final threaded stem length should be approximately 1.6 cm (16 mm) for proper fitting. We recommend getting this done by a local mechanic to ensure a clean cut and proper installation. Please ensure sufficient thread remains for secure fastening.
One small upgrade. Years of cheap, swap-friendly indicator choices.
Order the Adapter — ₹249Secure Razorpay checkout · Dispatched within 24 hours