Install guide

How to Fit Aftermarket Indicators on a Triumph 400 (Speed 400, Scrambler 400X) — Step-by-Step

Triumph's 400 series uses a custom indicator shape, so bolting on a normal aftermarket indicator doesn't work out of the box. The fix is a small bolt-on adapter. Here's the full process — it's mechanical, fully reversible, and takes about five minutes.

Works on the whole 400 lineup: Triumph Speed 400, Speed T4, Scrambler 400 X / XC, Thruxton 400 and Tracker 400. The MotoNyx Universal Indicator Adapter (₹499 ₹249, pair of 2 — Save ₹250) is what makes this possible.

What you'll need

Step-by-step

01

Unplug the stock indicator

Behind the headlamp (front) or under the tail (rear), find the OEM indicator connector and unplug it. On the Triumph 400 series it's a simple push-fit connector — no tools needed for this step. Take a photo first if you want a reference for routing.

02

Unscrew and remove the OEM indicator

Loosen the mounting nut holding the stock indicator to the bracket and pull the indicator clean off. Keep the nut and any spacer — you won't damage anything, and everything is fully reversible if you ever want the stock indicators back.

03

Bolt on the MotoNyx adapter

Thread the MotoNyx adapter into the factory indicator mount and snug it down. It's shaped to the Triumph 400's mount geometry, so there's no gap, no wobble, and no shims or zip ties. This is the part that lets any standard aftermarket indicator fit a mount that normally only accepts Triumph's own shape.

04

Fit your aftermarket indicator and reconnect

Screw your chosen aftermarket indicator (standard stem) into the adapter and route the wire back to the connector. The supplied MotoNyx harness connector fits the rear indicators only (plug and play). The front connector is different: reuse the connector from your old front indicator — the supplied wire length is sufficient. Test the indicators before your first ride.

Does it affect the wiring or warranty?

The adapter is purely mechanical. The MotoNyx wiring harness is plug and play at the rear only. The front connector is different: reuse the connector from your old front indicator; the supplied wire length is sufficient. Keep the motorcycle's original wiring loom intact, test the connections, and check warranty terms with your dealer.

Ready to swap your indicators?

Get the adapter — ₹249

Or read model-specific fitment for the Speed 400 and Scrambler 400 X.